Bungee Cord Mounting; Initial Start Up Of Device - xDEEP BLACK EANX User Manual

Table of Contents

Advertisement

BUNGEE CORD MOUNTING

The BlaCK eanX has four holes for bungee cord mounting:
In order to install the bungee cord:
1. Tie a knot at the end of the cord. next, thread the bungee cord through hole
a so that the knot is placed from the display side.
2. Thread the end of the bungee cord through holes B, C and D. The length of
the knot between holes a-B and C-D should be adjusted to the hand size.
3. Tie a knot in the appropriate place on the free end of bungee cord. Cut the
remaining bungee part and singe it with a lighter.
It is advisable to tie a knot between points B and C
as protection against the loss of device, in case the bungee cord
should break.
14

INITIAL START UP OF DEVICE

On initial start up of the device, the BlaCK eanX will display the configurator
for setting some basic options (language, date and time, units). after they are
set, the computer will start its surface mode.
attention! at initial start up the BlaCK eanX will display informa-
tion "Decompression algorithm initialized". It means that the
decompression algorithm was initialized and the device stores in
its memory no information on nitrogen retaining in the human
body. It is not allowed to use the BlaCK eanX, if you performed
any dives during the previous 48h, as this could lead to a very
high risk of decompression sickness (DCs).
when first started, the battery indicator will always indicate total discharge of
the device. This is intentionally set like this during the production process, after
the complete charge, for user's safety.
after connecting to the charger, the BlaCK eanX will indicate subsequent
charging stages and when it detects that the battery is fully charged, value
100% will be displayed. It is a standard procedure resulting from safety mecha-
nisms implemented in this device.
attention! Before the first use and also directly before each
dive check the settings of the device, in particular the operation
mode, conservative setting and gas configuration.
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents