Electric Connectors And Accesories; Connecting Power Supply To The Camera; Restoring Factory Defaults; Restore Factory Defaults By Software Means Via Web Browser - Novus NVIP-4DN3060H/IR-1P User Manual

NVIP-4DN3060H/IR-1P, NVIP-4DN3061H/IR-1P - User's manual (short form) ver 1.0.

ELECTRIC CONNECTORS AND ACCESORIES

5. ELECTRIC CONNECTORS AND ACCESORIES

5.1. Connecting power supply to the camera.

Camera can be supplied using external power supply unit corresponding with the camera parameters or
by using RJ45 network socket and PoE (802.3af) power supply unit.
Information:
Power supply adapter is not included. Please use power adapter with parameters specified in user's
manual.
Caution:
In order to provide protection against voltage surges/lightning strikes, usage of appropriate surge
protectors is advised. Any damages resulting from surges are not eligible for service repairs.

6. RESTORING FACTORY DEFAULTS

Camera allow to restore defaults via:

software (web browser level)

software (NMSiptool level)
6.1. Restoring factory defaults by software means
User can restore default settings of the IP camera except network settings. To restore to default settings
go to: "Advanced Config -> Config Backup & Restore" tab. Process of restoring takes about two
minutes.
6.2. Restoring factory defaults by software means (NMSiptool level)
NMSip (version 1.23.4 or later) allows to restore factory defaults. To restore settings find camera via
NMSiptool, click right mouse button and choose " Restore default configuration". Next, within 30
seconds, it is required to turn the camera power off and on.
All rights reserved © AAT Holding S.A.
16