•
Preinstalled NT to include the Product ID Number (PID)
•
Placed the Gold Drive Part Number, Date Created, LPIN, and
Release in Registry under:
HKey-Local_Machine\Software\NCR\Gold Drive
•
Ran Sysprep (so that the mini installation will run on initial boot)
with the following parameters:
‐ Automatically include PID
•
Host.cmd set in RunOnce to update the registry
•
Established a 2gb FAT16 primary system partition
•
Established a secondary NTFS partition that fills the remainder of
the drive
•
Included necessary OS cab files in C:\Install
•
Made SP6a folder available in C:\Install (installed)
•
Made I386 folder available in C:\Install
•
Installed MS SNMP, set to Manual
•
Replaced the standard EULA with the NCR‐specific EULA.
•
TerminalCheck.exe in Run registry to determine correct hardware
platform (otherwise it will shut down)
•
Hide MS splash screen by adding /noguiboot parameter to
boot.ini
•
SerMouse device disabled
•
Added /noserialmice to boot.ini
•
Set resolution to 800x600
•
Set colors to 65536
•
Disabled MousClass service
•
Updated C:\Install\drivers\touch folder to Microtouch 5.64 SR1
•
20.Manually added Com5
Note: This product should only be used on NCR 7402 terminals with a
Microsoft Windows NT 4.0 license.
Chapter 4: Operating System Recovery 4-11