Installing an NCR 5964 12.1-inch Touch LCD
The NCR 5964 can be connected as a remote device.
Note: A PC keyboard is required to configure a 5964 12.1‐inch Touch
LCD.
The following illustrations show the cable connections for the 5964 and
the 7402. There are two cables required.
•
DVI Cable – provides the video interface to the 5964
•
RS‐232 Y‐Cable – provides a serial interface and power to the 5964.
It also connects the 5964 PS/2 keyboard connector to the terminal,
which provides an interface for the wedge controller (MSR, PS/2
Keyboard, Scanner, and Tone Speaker).
Chapter 2: Hardware Installation
2-7
19429a