Cable Connector Identification - NCR realpos 70 User Manual

Cable Connector Identification

Mouse
RS232/2
Kybd
RS232/1
1. Connect the peripheral and LAN cables. The illustration identifies
the peripheral connectors on the terminal. See the sections that
follow for specific installation instructions for each of the
peripherals.
Line In
Line Out
Parallel
Mic
CRT
Note: RS232/1, RS232/2, and RS232/4 can be powered ports. They
are enabled via hardware straps on the Motherboard. RS232/3 is an
internal port that is dedicated to the Touch feature.
2. After installing the peripheral and LAN cables replace the cable
cover.
24V USB
DVI LAN
Chapter 2: Hardware Installation
Cash Drawer
RS232/4
12V USB 12V USB
2-5
USB
USB
20917