Installing Welding Gun; Setting Gun Polarity - Miller Electric OM-1313 Owner's Manual

2-7. Installing Welding Gun

2-8. Setting Gun Polarity

Tools Needed:
3/4, 11/16 in
OM-1313 Page 8
1
2
3
4
1
1 Drive Assembly
2 Gun Securing Knob
3 Gun End
Loosen securing knob. Insert gun
end through opening until it bottoms
against drive assembly. Tighten
nut.
4 Gun Trigger Plug
Insert plug into receptacle, and
tighten threaded collar.
Close door.
Ref. ST-801 567
1 Polarity Changeover Label
Always read and follow manufac-
ture's recommended polarity.
Ref. 190 821-A