Aaeon SBC-357 Manual page 66

7. Type SETUP <ENTER> to run the Windows Setup program. It
will show the current Windows configuration. Use the up arrow
key to move to the Display line and press <ENTER>.
8. A list of display drivers will be shown. Use the arrow keys to
select one of the drivers starting with an asterisk (*) and press
<ENTER>.
9. Follow the directions on the screen to complete the setup. In
most cases, you may press <ENTER> to accept the suggested
option.
Start Windows with the new display driver.
To change display drivers from DOS, change to the Windows
directory and run Setup, repeating steps 4 and 5 from the previous
page. Besides the special display drivers marked by an asterisk (*),
you should be able to use the following standard drivers:
VGA
Super VGA
Special panning drivers are provided to allow high-resolution
modes to be displayed on a flat panel or CRT. These drivers will
show a section of a larger screen, and will automatically pan or
scroll the screen horizontally and vertically when the mouse
reaches the edge of the display.
58 SBC-357 User Manual
640 x 480, 16 colors
800 x 600, 16 colors