Aaeon SBC-357 Manual page 48

AMIBIOS POST error messages are followed by:
Press <F1> to continue
If this option is set to Disabled, AMIBIOS does not wait for you
to press the <F1> key after an error message. The setting is
Enabled or Disabled. The default setting is Enabled.
When this option is set to Enabled, the contents of the F0000h
system memory segment can be read from or written to L2 cache
memory. The contents of the F0000h memory segment are
always copied from the BIOS ROM to system RAM for faster
execution.
The settings are Enabled or Disabled. The default setting is
Disabled.
This option allows you to select the hard disk delay time from 5
sec to 15 sec. The default setting is Disabled.
40 SBC-357 User Manual