Aaeon SBC-357 Manual page 56

Peripheral Setup options are displayed by choosing the Peripheral
Setup icon from the AMIBIOS Setup main menu. All Peripheral
Setup options are described in this section:
Onboard IDE
Onboard FDC
Onboard Parallel Port
Parallel Port Mode
ECP DMA
Parallel Port IRQ
Onboard Serial Port 1
Onboard Serial Port 1 RQ
Onboard Serial Port 2
Onboard Serial Port 2 IRQ
Onboard Serial Port 3
Onboard Serial Port 3 IRQ
Onboard Serial Port 4
Onboard Serial Port 4 IRQ
This option specifies the onboard IDE controller channels that
will be used. The settings are Disabled or Enabled.
This option enables the floppy drive controller on the mother-
board. The settings are Enabled, or Disabled.
48 SBC-357 User Manual
AMIBIOS SETUP — BIOS SETUP UTILITIES
(C) 1995 American Megatrends, Inc. All Rights Reserved
Standard CMOS Setup
Advanced CMOS Setup
Advanced Chipset Setup
Power Management Setup
Change User Password
Change Supervisor Password
Change Language Setting
Auto Configuration with Optimal Settings
Auto Configuration with Fail Safe Settings
Save Settings and Exit
Standard CMOS setup for changing time, date, hard disk type, etc.
ESC: Exit :Sel
¯-
AMIBIOS SETUP — PERIPHERAL SETUP
(C) 1995 American Megatrends, Inc. All Rights Reserved
Peripheral Setup
Exit Without Saving
F2/F3: Color F10: Save & Exit
Available Options:
:Enabled
Disabled
:Enabled
Enabled
:378
:SPP
:DMA3
:IRQ7
:3F8
:4
:2F8
:3
:3E8h
:IRQ-A
ESC: Exit
:2E8h
PgUp/PgDn: Modify
:IRQ_B
F2/F3: Color
:Sel
¯-