Aaeon SBC-357 Manual page 64

These drivers are designed to work with Microsoft Windows
Version 3.1. You may install these drivers either through Windows
or in DOS.
1. Install Windows as you normally would for a VGA display. Run
Windows to make sure that it is working correctly.
2. Place the Supporting CD-ROM into your CD-ROM drive. In
the Windows Program Manager, choose File from the Options
Menu. Then from the pull-down menu, choose Run. At the
Command Line prompt, type
cd-rom drive: \CD ROM\model name\sbc-357\vga driver
"cd-rom": the drive letter of your CD-ROM drive
"model name": the model number of your product
Press the <ENTER> key or click OK to begin the installation.
At this point the setup program locates the directory where
Windows is installed. For proper operation, the drivers must
be installed in the Windows subdirectory.
3. Press <ENTER> to complete the installation. Once completed,
the Display Driver Control Panel appears on the screen. You
can find the ChipCPL under the Control Panel. The icon allows
you to select and load the installed drivers.
To change display drivers from Windows, select the Windows
Setup icon from the Main window. You will be shown the current
setup configuration. Select Change System Settings from the
Option menu. Click on the arrow at the end of the Display line. You
will be shown a list of display drivers. Click on the driver you want
to select. Then click on the OK button. Follow the directions to
complete the setup.
56 SBC-357 User Manual
\Oemsetup.inf.