Aaeon SBC-357 Manual page 65

After you change display drivers, you may notice that the color
scheme used by Windows looks strange. This is because different
drivers have different default colors. You can correct this by
choosing the same color scheme or a new color scheme. First select
the Control Panel from the Main window. Select the Color icon.
You will be shown the current color scheme. Choose a new color
scheme and click the OK button.
1. Install Windows as you normally would for a VGA display. Run
Windows to make sure that it is working correctly. Then exit
from Windows.
2. Place the Supporting CD-ROM into yur CD-ROM drive. Type
cd-rom drive:
<ENTER> to make this the default drive.
3. Type "\CD ROM\model name\sbc-357\357\vga driver\setup"
<ENTER> to run the driver SETUP program. Press any key to
get to the applications list.
"cd-rom": the drive letter of your CD-ROM drive
"model name": the model number of your product
4. Using the arrow keys, select Windows Version 3.1 and press the
<ENTER> key. Press the <ENTER> key to select All Resolu-
tions, then press <END> to begin the installation.
5. At this point you will be asked for the path to your Windows
System directory (default C:\WINDOWS). When the installa-
tion is complete, press any key to continue. Press <ESC>
followed by Y to exit to DOS.
6. Change to the directory where you installed Windows (usually
C:\WINDOWS).
Chapter 4 SVGA Setup 57