Head Hps Version Preliminary Setup; Linkage Rod A Assembly - SAB Goblin 700 Manual

Chapter 8, Installation Of Swashplate Servos
The wire for the front servo must be positioned here

Head HPS Version Preliminary Setup

Adjust the linkage as shown. The linkage Rod A has thead right/left.
Turning, you can change the tracking without disconnecting the
plastic ball link.
Linkade Rod A
Aseembly
Linkade Rod B
Aseembly
Page 16
Linkage Rod A Assembly ... x2
Approx 76 mm
Linkage Rod
Plastic ball link M3x50mm
(H0402-S)
(H0417-S)
Initial length for the rods from the swashplate to the blade grips.
Linkage Rod B Assembly
Plastic ball link
(H0066-S)
Initial length for the rods from the servos to the swash plate.
Plastic ball link
(H0402-S)
... x3
Set Screw M2.5x18mm
(HC140-S)
Plastic ball link
(H0066-S)
Approx. 49 mm