Table of Contents
Advertisement
Radius Arm Assembly ... x 2
Flanged Bearing
3x
7x3mm
Radius Arm
(HC402-S)
(H0421BL-S)
Note:
The HPS3 head should be assembled with one, 1mm shim
(HC230) and one, 0.2mm shim (HC232) on each side.
The blade grips must move freely, but they should not
move just under their own weight.
If the blade grips are too tight, you can remove the
0.2mm shim (HC232) from each side.
After approximately 10/20 flights, please check preload,
you can add one or two 0.2mm shim (HC232) if preload
has changed.
Uniball Radius Arm
(H0415-S)
Flanged Bearing
2.5x
6x2.5mm
(HC400-S)
Socket Head Cap
Screw M2.5x10mm
(HC022-S)
Linkage Rod A Assembly . . . .x3
Plastic Ball Link
(H0402-S)
Linkage Rod
M3x50mm
(H0417-S)
Center Hub Assembly
Pin 5 mm
(H0413-S)
Spacer Arm
Spacer Arm
(H0416-S)
(H0134-S)
Flanged Bearing
2.5x
(HC400-S)
Swashplate Assemly
Swashplate
Assemly
(H0420BL-S)
[HC230-S]
Washer
3x
(HC176-S)
Radius Arm
Assembly
Socket Head Cap
Screw M3x16mm
(HC068-S)
(Initial length for the rods from the
swashplate to the Blade Grip.)
* Clock-wise, counter clock-wise thread
Plastic Ball Link
(H0402-S)
* By turning the linkages you can adjust
tracking. If tracking is adjusted correctly,
you'll see the metal part line up around
in the center of the opening.
[HC176-S]
6x2.5mm
Radius Arm
Assembly
Socket Head Cap
Screw M3x10mm
(HC056-S)
[HC232-S]
4x0.5mm
Main Blade Grip
Assembly
Approx. 76mm
Socket Head Cap
Screw M2.5x6mm
(HC018-S)
Center Hub
(H0410BL-S)
eg: Microlube GL261
Spindle
(H0412-S)
Socket Head Cap
Screw M3x16mm
(HC068-S)
Socket Head Cap
Screw M2.5x10mm
(HC022-S)
Main Blade Grip Assembly ....x2
Uniball M3
Main Blade Grip
(H0065-S)
(H0182BL-S)
Uniball
(H0063-S)
Socket Head Cap
Screw M4x10mm
(HC102-S)
Thrust Bearing
10x
18x5.5mm
(HC438-S)
Note: Large ID Inside
Washer
10x
16x1mm
(HC230-S)
Washer
(HC194-S)
Left Side
DETAIL A
Chapter 6, Head
BAG 7B, FOAM 3
Oring
(HA024)
Damper Derlin
(H0426-C)
Blade Grip Arm
(H0183BL-S)
Uniball M3
(H0065-S)
Bearing
10x
19x5mm
(HC422-S)
Bearing
10x
19x5mm
(HC422-S)
6x
14 x1mm
Socket Head Cap
Screw M6x10mm
(HC124-S)
A
Right Side
Page 13
Advertisement
Table of Contents
