Onkyo TX-NR5010 Instruction Manual page 49

■
Listening Modes
Listening Mode Description
Pure Audio *1 In this mode, the display and video circuitry
are turned off, minimizing possible noise
P u r e A A u d i o
sources for the ultimate in high-fidelity
audio reproduction. (As the analog video
circuitry is turned off, only video signals
input through HDMI IN can be output from
the HDMI output.)
Direct In this mode, audio from the input source is
output without surround-sound processing.
D i r e c t
The speaker configuration (presence of
speakers) and speaker distance settings are
enabled, but much of the processing set via
the audio setup is disabled. See "On-screen
Setup" for more details
Stereo Sound is output from the front left and right
speakers and subwoofer.
S t e r e o
Mono
Use this mode when watching an old movie
with a mono soundtrack, or use it with the
M o n o
foreign language soundtracks recorded in the
left and right channels of some movies. It
can also be used with DVDs or other sources
containing multiplexed audio, such as
karaoke DVDs.
Multichannel
This mode is for use with PCM multichannel
sources.
M u l t i c h
DSD *3 In this mode, audio from the input source is
output without surround-sound processing.
D S D
The speaker configuration (presence of
Dolby Digital
speakers), crossover frequency, speaker
distance, A/V Sync and much of the
D o l b y D
processing set via the audio setup are
Dolby Digital Plus *4
enabled. See "On-screen Setup" for more
details (➔ page
D o l b y D +
Dolby TrueHD
D o l b y T r u e H D
Input Speaker
Source Layout
A zxc
S n
D v
F
G
H
(➔ page 57).
zxc
nmv
D xcn
F mv
D xcn
mv
D xcn
57). mv
F xcn
mv
D xcn
mv
F xcn
mv
Listening Mode
DTS
D T S
*2 m
DTS-HD High
Resolution Audio
D T S – H D H R
DTS-HD Master
Audio
D T S – H D M S T R
DTS Express
D T S E x p r e s s
DTS 96/24 *5
D T S 9 6 / 2 4
DTS-ES Discrete *6
E S D i s c r e t e
DTS-ES Matrix *6
E S M a t r i x
*2
*2
En-49
Turning On & Basic Operations
Description
In this mode, audio from the input source is
output without surround-sound processing.
The speaker configuration (presence of
speakers), crossover frequency, speaker
distance, A/V Sync and much of the
processing set via the audio setup are
enabled. See "On-screen Setup" for more
details (➔ page 57).
This mode is for use with DTS 96/24
sources. This is high-resolution DTS with a
96 kHz sampling rate and 24-bit resolution,
providing superior fidelity. Use it with
DVDs that bear the DTS 96/24 logo.
This mode is for use with DTS-ES Discrete
soundtracks, which use a discrete surround
back channel for true 6.1/7.1-channel
playback. The seven totally separate audio
channels provide better spatial imaging and
360-degree sound localization, perfect for
sounds that pan across the surround
channels. Use it with DVDs that bear the
DTS-ES logo, especially those with a DTS-
ES Discrete soundtrack.
This mode is for use with DTS-ES Matrix
soundtracks, which use a matrix-encoded
back-channel for 6.1/7.1-channel playback.
Use it with DVDs that bear the DTS-ES
logo, especially those with a DTS-ES Matrix
soundtrack.
Input Speaker
Source Layout
D xcn
mv
D xcn
mv
F xcn *2
mv
D xcn
mv
F xcn *2
mv
D xcn
mv
D xcn
mv
G ,
+
*
v