To Change The Recall Mode; To Change The System Pin - Motorola O201 User Manual

U D
4. Scroll or to
If you choose Select
U D
•
Scroll or
U D
•
Scroll or
Select.
n
5. Press to return to standby mode.
9.5

To change the recall mode

Recall is useful to access certain network services and PABX/switchboard services.
The default recall mode preset in the phone is suitable for your country network and
therefore you should not need to change it.
NOTE
The use of the phone cannot be guaranteed on all PABX.
1. Press Menu, scroll
D
2. Scroll to Set Base
D
3. Scroll to Recall Mode
U D
4. Scroll or to
n
5. Press to return to standby mode.
9.6

To change the System PIN

The System PIN is required when changing certain settings and for registration / de-
registration. The default setting is 0000. You can change this to your own preferred number
(up to 8 digits).
When you enter a PIN, the digits are shown as ********.
1. Press Menu, scroll
D
to Set Base
2. Scroll
D
3. Scroll to System PIN
4. Enter the old PIN (Default setting = 0000) and press OK.
5. Enter the new PIN and press OK.
6. Re-enter the new PIN and press OK.
n
7. Press to return to standby mode.
NOTE
It is advisable to make a note of your new PIN code and keep it somewhere safe.
36
All Handsets or Select Handset
Handset, all available handsets are displayed.
to the handset you want then press Select.
to the number of rings that you want to set: 2, 4 or 6 and press
D
to Settings and press Select.
and press Select.
and press Select.
Recall 1 (100ms) or Recall 2
D
to Settings and press Select.
and press Select.
and press Select.
then press Select.
(600ms) then press Select to confirm.
Base settings