Table of Contents
Advertisement
D
D
There are two ways to check the diode rectifier.
The Diode Rectifier supplies DC voltage to the stator. To check Diode voltage output, disconnect
the J & K wires at the harness that are connected to the stator with yellow wires. The two yellow
wires will be connected with quick disconnect connectors.
(Nominal readings +/- 10% engine speed 3600 RPM, no load)
Output Wires
Yellow to Yellow - - - - - - - - - - - - - - - - - - - - - - 12 - 18V DC
Diode rectifiers are mounted inside the control panel
To properly check continuity you must disconnect (un-solder) or isolate the leads
connected to the Diode. Check for continuity / no continuity as shown below.
I
O
D
E
R
E
C
T
I
O
D
E
R
E
C
T
How to test the Diode Rectifier
Diode Rectifier Output (DC)
Diode Rectifier Continuity
Multiquip Inc. ◦ GA Series Generators ◦ Manual No. GAGENSM
I
F
I
E
R
A
C
/
D
I
F
I
E
R
A
C
/
D
Voltage DC
Yellow Wires
C
C
Model
(ALL)
Hide quick links:
Advertisement
Table of Contents
