Specifications - GBC Talon 44 CE Installation & Operation Manual

Operations Manual
Intended Films and Applications:
Film: Thermal and PSA Films:
– Octiva™ Thermal
– Octiva™ Lo-Melt
– Artic™ Pressure Sensitive
– Artic™ Mounting Films
– AccuShield™
Applications:
– Signs
– Posters
– Event Graphics
– Trade Show Graphics
– Presentations
– Banners
– Store Signage
– Floor Graphics
– Backlit Displays
– Vehicle Graphics
©2004 General Binding Corporation
Fig 1
Specifications - Talon 44
Operating Speed:
Up to 10 fpm (3 mpm)
Max Temperature:
270 °F (132°C)
Max. Mounting Thickness:
1/2 in. (1.3 cm)
Max. Film Width:
43 in. (109 cm)
Dimensions (W x D x H):
64.5 in. x 40.25 in. x 51.5 in.
Unit alone: (Figure 1)
(164 cm x 102 cm x 131 cm)
Shipping:
67 in. x 43 in. x 62.5 in.
(170 cm x 109 cm x 159 cm)
Weight:
Unit alone: 788 lb. (357 kg.)
Shipping:
965 lb. (438 kg.)
Noise Rating:
LpA: 61dB A (Sound Pressure Level) Fans OFF
LpA: 65dB A (Sound Pressure Level) Fan ON
Electrical Requirements:
Refer to the serial plate located on the rear of the laminator
for the specific electrical rating applicable to the unit.
Voltage: 400V, 3N, 50 Hz
Current: 7.3A
Power:4000W
Phase: 3
Interrupting Capacity: 1500A
Ambient Air Temperature: 5-40 °C (41-104 °F)
Humidity Rating: 30-95% non-condensing
Altitude Rating: Up to 1000 Meters Min. (2540 Feet)
T 44/64
ALON CE
Page 11