I/O Connectors; Sata (Serial Ata) Connectors - DFI TPC121 User Manual

BIOS Setting
Configure the onboard audio in the Chipset menu ("South Bridge" submenu) of the BIOS.
Refer to chapter 3 for more information.
Driver Installation
Install the audio driver. Refer to chapter 8 for more information.
Chapter 6 Ports and Connectors
Chapter 5

I/O Connectors

SATA (Serial ATA) Connectors

Features
• Serial ATA ports
- 4 SATA 2.0 ports with data transfer rate up to 3Gb/s
The Serial ATA connectors are used to connect Serial ATA devices. Connect one end of the Se-
rial ATA cable to a SATA connector and the other end to your Serial ATA device.
BIOS Setting
Configure the Serial ATA drives in the Advanced menu ("SATA Configuration" submenu) of the
BIOS. Refer to chapter 7 for more information.
35
SATA 2.0 3Gb/s
7
GND
RXP
RXN
GND
TXN
TXP
GND
1
www.dfi .com