Cc Transmit Channel - Johnson Amplification Integrated Modeling Amplifier User Manual

Johnson Millennium
3. Turn either function keys <2 or 3> to assign a CC number to the selected expression pedal . The display will appear like this on page 11 if,
for example Exp 1 is selected. (Exp1=Internal Expression pedal 1 insert on Millennium w/o the J-12. Or, expression pedals 1 or 2 on the J-
12 when connected. The display now reads:
Page 12 will appear like this:
4. Press the <Utility> button to exit.
For a complete explanation of expression pedal names, please refer to page 68.

CC Transmit Channel

- This option allows you to set the MIDI channel on which CCs will be sent out the Millennium MIDI Out port to
other MIDI devices. If you are using the J-12 for the Millennium only, you don't need to worry about setting up this option.
However, if you plan to use the J-12 for continuous control over other MIDI devices (either in conjunction with the Millennium or by
themselves), you need to assign a MIDI transmit channel for each of the CC numbers you'll be using for continuous control of the other
devices.
To change the MIDI channels on which the selected CCs will transmit to other MIDI devices, do the following:
1. Press the <Utility> button once. The and the display should appear something like this:
User Guide
2
CCsnd:Exp1
30
1 2
LINK CHANGED LINK CHANGED
WAH TUBE EQ
FACTORY USER
#
b
11 16
PAGE OF
2
CCsnd: Exp3
1 2 OFF
LINK CHANGED LINK CHANGED
WAH TUBE EQ
FACTORY USER
#
b
12 16
PAGE OF
2
Stereo Cab:4x12
2
1 2 3
LINK CHANGED LINK CHANGED LINK
WAH TUBE EQ
FACTORY USER
#
b
1 16 DIGITAL
PAGE OF
Section - 6 The J-12 Foot Controller
Exp2
3 OFF 4
LINK CHANGED LINK CHANGED
GATE
L/R OUTS
DIGITAL
CLIP L/R OUTS
Exp4
3 OFF
LINK CHANGED LINK CHANGED
GATE
L/R OUTS
DIGITAL
CLIP L/R OUTS
Tuner
2 Off
4
CHANGED LINK CHANGED
GATE
L/R OUTS
CLIP L/R OUTS
73