Selecting A Preset; Using The Tuner - Johnson Amplification Integrated Modeling Amplifier User Manual

Johnson Millennium

Selecting A Preset

When you first turn on your Millennium, you are in Preset mode, and the display will appear something like:
To select a preset, do the following:
1. Make sure Preset mode is selected (the <Preset> button will be brightly lit). If the <Preset> button is dim, press it once to return to
preset mode.
2. Use the <Preset> button to select the preset bank (factory or user). Successive presses of the <Preset> button toggle between the
factory and user bank of presets.
3. Using the <Preset/Effect> wheel, scroll to the preset you want to use.

Using the Tuner

The Tuner of the Millennium can be accessed two ways. Either in page l of the Utility menu or by using the optional Johnson Amplification
J-12 foot controller. The following explains both modes of operation.
Utility Menu Tuner Mode
1. Press the <Utility> button once. The display reads:
2. Now turn the <4> knob to turn the tuner on. The display will now appear something like this:
User Guide
2
Clean Comp Delay
0 %kHz 0 %kHz
1 2
msdB msdB
LINK CHANGED LINK CHANGED
WAH TUBE EQ
U SER
b
1 1
PAGE OF
127
Stereo Cab:4x12
2
2
1 2
LINK CHANGED
WAH TUBE
DIST
FACTORY USER
BANK 1 1 6
PAGE OF
127
?? TUNER A=440
LINK CHANGED
WAH TUBE
DIST
FACTORY USER
b
0 %kHz 100 %
3 4
msdB
LINK CHANGED LINK CHANGED
GATE
L/R OUTS
#
CLIP
Tuner
%kHz
3 2 Off
4
msdB
LINK CHANGED LINK CHANGED
EQ GATE L/R OUTS
EQ
MIDI
DIGITAL SOLO
CLIP L/R OUTS
Output
%kHz %
3 4 100
msdB
LINK CHANGED LINK CHANGED
EQ GATE
L/R OUTS
EQ
#
MIDI
DIGITAL SOLO
CLIP L/R OUTS
Section - 2 Setting Up
19