DSC Power632 PC1555 Instruction Manual page 11

LCD5501 Z Fixed Message Keypad LCD5500Z Keypad
n p a n n^ Etl t,~ r, r^sr^ie
U O D U To arm ^,^_ tem
ooo ooo^D-- ©a
Aw,ry A^y
ooo^^„.a^
oo(D^,-)-a^a oooi0•an^^o
^oo''a^* ^`
L
MaaaaSaDlaplaYSaeurityStatlon ^wN I
rt Presstosel f I ^/yy
p P,esstoEi IR t TESTSYSTEMWEEKLY
Man„als g
a lada. P I y
uclinns
-neess m edrceoce ^'spay io me I
^1f ,cto, qe.
X ^ (k{^ P ^o see P ^uncl on , me55agB
IQ^qll U ^ E T'.YSTEcwy/nNa^u
c^ennpq^ooei ncPeiwe
C
e:rre-^,rcunor:
9
_ _..-.-. L__._ - . . . .
The Liquid Crystal Display (LCD) displays prompts and
Emergency Keys
system information on two 16 character lines. Press both 40' keys for 2 seconds to send a FIRE
If "< >" appears, more information can be accessed by transmission.
using the arrow (< >) keys. Press [<] to see the previous Press both 0' keys for 2 seconds to send an
function or item of information, Press [>] to advance the AUXILIARY transmission.
display to next function or item of information.
Press the keys on the number pad as prompted by the Press both *' keys for 2 seconds to send a PANIC
LCD display to view alarms or troubles, to arm and disarm transmission.
the system and to bypass zones.
* IMPORTANT NOTE (All Keypads): The Fire,
To exit a function and return to the Ready state, press [#]. To Auxiliary and Panic keys will NOT function unless
select a function press [*]. programmed by the installer. If these keys are in
Display Lights (All Keypads)
service and the installer has enabled audible
Ready Light feedback, holding down the key for two seconds
will cause the keypad sounder to beep indicating
If the Ready light is ON, the system is ready for arming.
that the input has been accepted and transmission
The system cannot be armed unless the Ready light is is underway. The [A]
and zt keys are programmed
ON (see 'Arming the System' on page
4). to be used for non-medical emergencies only in
Armed Light the United States, as per UL requirements.
If the Armed light is ON, the system has been armed
successfully.
Trouble or System Light
If the Trouble light is ON, see "Viewing Trouble
Conditions" on page 11.
IMPORTANT NOTE: Test system weekly
and have any system trouble conditions
corrected by your alarm installer.
9