Copying Two Pages Onto Single Page - Canon MG5700 Series Online Manual

Copying Two Pages onto Single Page

When you select 2-on-1 copy for Layout in Standard copy, you can copy two original pages onto a single
sheet of paper by reducing each image.
Press the right Function button on the Copy standby screen to display the print settings screen and select
2-on-1 copy for Layout.
Press the right Function button to specify the orientation and the advanced layout.
• When you select Portrait for Orientation and Left to right for 2-on-1 copy layout:
• When you select Portrait for Orientation and Right to left for 2-on-1 copy layout:
• When you select Landscp. for Orientation and Top to bottom for 2-on-1 copy layout:
• When you select Landscp. for Orientation and Bottom to top for 2-on-1 copy layout:
After selecting the layout and press the OK button, you can select whether you use the preview screen. If
you select ON, the preview screen is displayed so that you can check the orientation.
Note
• If Device memory is full. Cannot continue process. appears on the LCD when scanning, set the print
quality to Standard and try copying again. If the problem is not resolved, set the print quality to Draft
and try copying again.
• This function can be used in combination with Two-sided copy.
If you use this function in combination, you can copy four original pages on one sheet of paper. In this
case, two original pages are copied on each side of paper.
If you use this function in combination, select 2-sided for 2-sidedPrintSetting and select the
orientation and the stapling side of print paper on the Print settings screen.
569