Canon MG5700 Series Online Manual page 915

If USB Printing Support Properties screen does not appear, make sure the machine is correctly
connected to the computer.
Make sure machine is properly connected to computer.
Check3
3. Click General tab and check for a device problem.
If a device error is shown, see Windows Help to resolve it.
Other Error Messages (Windows)
If an error message appears outside printer status monitor, check the
Check
following:
• "Could not spool successfully due to insufficient disk space"
Delete any unnecessary files to increase the amount of free space on the disk.
• "Could not spool successfully due to insufficient memory"
Close other applications to increase the available memory.
If you still cannot print, restart your computer and retry the printing.
• "Printer driver could not be found"
Uninstall the MP Drivers following the procedure described in
reinstall them from the Setup CD-ROM or the Canon website.
• "Could not print Application name - File name"
Try printing again once the current job is complete.
Inkjet Printer/Scanner/Fax Extended Survey Program Screen Is
Displayed (Windows)
If the Inkjet Printer/Scanner/Fax Extended Survey Program is installed, a screen appears asking for
permission to send the machine and application usage information every month for about ten years.
Read the information on the screen and follow the instructions below.
Deleting the Unnecessary MP Drivers
915
and