Copying Photos - Canon MG5700 Series Online Manual

Copying Photos

You can scan printed photos and print them all at one time.
1. Make sure machine is turned on.
2. Load photo paper.
3. Select Advanced print on HOME screen.
LCD and Operation Panel
4. Select Photo copy and press OK button.
5. Check on-screen instructions and press OK button.
6. Load printed photo on platen glass following on-screen instructions and press OK button.
Note
• For more on loading photos on the platen glass:
Loading Originals
When scanning is complete, the Copy standby screen is displayed.
7. Change print settings as necessary.
Press the right Function button to display the print setting screen.
Use the button to change the setting item and use the
Note
• Depending on the setting item, some settings cannot be specified in combination with the setting
of other setting items. If the setting cannot be specified in combination is selected, Error details
appears on the LCD and
button to check the message and change the setting.
1. Page size
appears at the setting item. In this case, press the left Function
577
button to change the setting.