Cleaning The Paper Feed Roller - Canon MG5700 Series Online Manual

Cleaning the Paper Feed Roller

If the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly.
In this case, clean the paper feed roller. Cleaning will wear out the paper feed roller, so perform this only
when necessary.
You need to prepare: three sheets of A4 or Letter-sized plain paper
1. Make sure that the power is turned on.
2. Select Setup on the HOME screen.
LCD and Operation Panel
The setup menu screen will appear.
3. Select Maintenance, then press the OK button.
The Maintenance screen will appear.
4. Select Roller cleaning, then press the OK button.
The confirmation screen will appear.
5. Select Yes, then press the OK button.
6. Follow the message to remove any paper from the cassette, then push it back.
7. Press the OK button.
The paper feed roller will rotate as it is cleaned without paper.
8. Make sure that the paper feed roller has stopped rotating, then follow the message to load
three sheets of A4 or Letter-sized plain paper in the cassette.
9. Open the paper output tray gently.
10. Press the OK button.
The machine starts cleaning. The cleaning will be complete when the paper is ejected.
209