Canon MG5700 Series Online Manual page 537

Note
• Depending on the device you are using, entering the password is required to connect a device
to the machine via wireless LAN. Enter the password specified for the machine.
• If your Wi-Fi Direct compatible device is set to prioritize using Wi-Fi Direct and it is connecting
to the machine, the machine displays a confirmation screen asking if you allow the device to
connect to the machine.
Make sure the name on the LCD is the same as that of your device, select Yes, and then press
the OK button.
Printing/Scanning with Direct Connection
Connect a device and the machine with direct connection and start printing/scanning from the device.
Note
• For more on printing or scanning from a device via wireless LAN, refer to the device's or application's
instruction manual.
Terminating Direct Connection
In environments that the machine is usually connected with the computer over the wireless LAN, set the
machine to the wireless LAN connection following the procedure below when you finish using the machine
with the direct connection temporarily.
1. Select Setup on HOME screen.
LCD and Operation Panel
2. Select Device settings and press OK button.
3. Use button to select LAN settings and press OK button.
4. Use button to select Change LAN and press OK button.
5. Use button to select Activate wireless LAN and press OK button.
If you do not use the machine over wireless LAN, select Disable LAN.
Changing Direct Connection Setting
Change the settings for the direct connection following the procedure below.
1. Make sure machine is turned on.
2. Select Setup on HOME screen.
LCD and Operation Panel
537