Parent Unit Power Supply - Motorola MBP35S User Manual

2.3

Parent Unit Power Supply

IMPORTANT
Installing the rechargeable battery pack and charging it fully before use is
recommended, to allow temporary battery operation if the unit is moved.
1. Connect the small plug of the power adapter to the parent unit and the
other end to a suitable electrical outlet. Only use the enclosed power
adapter (5V DC / 600mA) with the Micro USB style plug.
2. Press and hold the
to turn ON the parent unit.
3. Once the baby and parent units are switched on, the display on the parent
unit will show the video captured by the baby unit.
4. If there is no connection or you are out of range, the video display will be
replaced by a
parent unit closer to the baby unit until the link is re-established.
5. Press and hold the
finishes scrolling, to turn OFF the parent unit.
NOTE
The battery icon
a beep every 16 seconds. The battery needs to be recharged. The battery pack
takes about 12 hours to charge fully.
When charging
1. During charging, the battery icon at the top right of the screen indicates
that it is charging. If the parent unit is turned off while charging, a plug icon
shows for 5 seconds, followed by a battery icon for 45 seconds. The Blue
LED at the top left indicates that the power adapter is plugged in.
10
P
POWER ON/OFF button for more than 1 second
symbol and the unit will beep every 5 seconds. Move the
P
POWER ON/OFF button, until the progress bar
turns RED to indicate that the battery is low, and it gives
Getting Started