Registration (Pairing); View Video Through Tv - Motorola MBP35S User Manual

2.4

Registration (Pairing)

The Baby monitor is pre-registered to your Parent Unit. You do not need to
register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the procedure
below:
M
1. Press the button of the parent unit and the menu bar will pop up.
<
2. Press the LEFT button or
the / /
+
3. Press the UP button or
O
button to confirm.
4. / /
to select the desired camera position and press the
searching for a camera unit. The green audio level LED will flash rapidly
while searching.
O
5. Press the
6. Press and hold the PAIR button underneath the baby unit until the parent
unit finds the camera, beeps and the video from the camera appears.
NOTE
If a particular Baby Unit was registered previously, registering this current
Baby Unit again will overwrite the old registration.
2.5

View Video Through TV

Connect a suitable AV cable into the AV OUT socket on the side of the Parent
Unit and into the AV input of the TV. Press the
button to select
the Baby monitor picture is visible. AV cable is an optional accessory, which is to
be purchased separately.
NOTE
You can also hear your baby in mono mode by connecting the 3.5mm plug
wired headset to the AV OUT socket.
Getting Started
>
/ menu will pop up.
-
DOWN button to select
/ will pop up, press the
button to confirm.
on the Parent unit. Select the AV input on the TV menu until
RIGHT button until
+
UP button or
<
LEFT button or
is highlighted, and
, and press the
-
DOWN button
O
button to start
>
RIGHT
11