11.5
Service Menu
▷
MENU ▶ MENU ▶ Service Menu
Fig. 43: Service Menu
11.5.1 Overview
In the Service Menu, you can
● Update the receiver's operating software (11.5.2 – 11.5.4)
● Update, load, back up or restore the channel list (11.5.3 – 11.5.4)
● Reset the receiver to factory settings (11.5.5, P. 93)
● Obtain information about the device's software (11.5.6, P. 93)
11.5.2 Automatic software update
▷
MENU ▶ MENU ▶ Service Menu ▶ Automatic software update
Define whether the receiver should update the software automatically.
On
When updating the EPG data, the receiver checks whether more up-to-date software
is available.
Off
The receiver does not automatically search for more up-to-date software.
If the receiver finds a new software version, the message New software available (similar to
Fig. 44) appears on the next switch-on (from standby). Press one of the following buttons:
OK performs the update as per 11.5.3. After the update has been completed, the receiver will
87 of 164
87 of 164