Removing The Cover - Asus Terminator 2 Barebone System T2-AH1 Product Manual

2.3

Removing the cover

To remove the cover:
1. On the rear panel, locate the
three screws that secure the
cover to the chassis.
2. Use a Phillips screw driver to
remove the cover screws. Keep
the screws for later use.
3. Slightly pull the cover toward
the rear panel until the side tabs
are disengaged from the
chassis.
4. Lift the cover, then set aside.
A S U S T 2 - A H 1 A S U S T 2 - A H 1 A S U S T 2 - A H 1 A S U S T 2 - A H 1 A S U S T 2 - A H 1
1 1 1 1 1
1 1 1 1 1
2 2 2 2 2
2 2 2 2 2
2 2 2 2 2
4 4 4 4 4
3 3 3 3 3
1 1 1 1 1
3 3 3 3 3
2 - 3 2 - 3 2 - 3 2 - 3 2 - 3