Asus Terminator 2 Barebone System T2-AH1 Product Manual page 101

The following item appears only when you set the A I O v e r c l o c k i n g
item to [Manual].
CPU Frequency [XXX] CPU Frequency [XXX]
CPU Frequency [XXX] CPU Frequency [XXX] CPU Frequency [XXX]
Displays the frequency sent by the clock generator to the system bus and
PCI bus. The value of this item is auto-detected by the BIOS. Use the < + >
and < - > < - > < - > keys to adjust the CPU frequency. You can also type the desired < - >
< - >
CPU frequency using the numeric keypad. The values range from 100 to
400. Refer to the table below for the correct Front Side Bus and CPU
External Frequency settings.
Overclock Options [Overclock 5%] Overclock Options [Overclock 5%]
Overclock Options [Overclock 5%] Overclock Options [Overclock 5%] Overclock Options [Overclock 5%]
Allows you to overclock the CPU speed through the available preset values.
Configuration options: [Overclock 5%] [Overclock 10%] [Overclock 15%]
[Overclock 20%] [Overclock 30%]
• Support for overclock function depends on your system
configuration. ASUS does not guarantee this function for any system
configuration.
• The O v e r c l o c k O p t i o n s O v e r c l o c k O p t i o n s item appears only when the A I O v e r c l o c k O p t i o n s O v e r c l o c k O p t i o n s O v e r c l o c k O p t i o n s
O v e r c l o c k i n g O v e r c l o c k i n g O v e r c l o c k i n g O v e r c l o c k i n g O v e r c l o c k i n g item is set to [Overclock Profile].
PCIE Frequency [100] PCIE Frequency [100] PCIE Frequency [100] PCIE Frequency [100] PCIE Frequency [100]
Allows you to set the PCI Express frequency.
Use the numeric keypad to enter the value.
Spread Spectrum [Disabled] Spread Spectrum [Disabled]
Spread Spectrum [Disabled] Spread Spectrum [Disabled] Spread Spectrum [Disabled]
Allows you to enable or disable the clock generator spectrum.
Configuration options: [Disabled] [Enabled]
DDR Voltage [2.60V] DDR Voltage [2.60V] DDR Voltage [2.60V]
DDR Voltage [2.60V] DDR Voltage [2.60V]
Allows you to set the DDR voltage.
Configuration options: [2.60V] [2.70V] [2.80V] [2.90V]
A S U S T 2 - A H 1 A S U S T 2 - A H 1 A S U S T 2 - A H 1 A S U S T 2 - A H 1 A S U S T 2 - A H 1
A I O v e r c l o c k i n g A I O v e r c l o c k i n g A I O v e r c l o c k i n g A I O v e r c l o c k i n g
< + > < + > < + >
< + >
A I A I A I A I
5 - 1 9 5 - 1 9 5 - 1 9 5 - 1 9 5 - 1 9