Internal Connectors; Floppy Disk Drive Connector (34-1 Pin Floppy); Serial Ata Connectors [Black] (7-Pin Sata) - Asus Pedestal/5U Rackmount Server TS500-E5 User Manual

4.3

Internal connectors

1. Floppy disk drive connector (34-1 pin FLOPPY1)
This connector is for the provided floppy disk drive (FDD) signal cable. Insert
one end of the cable to this connector, then connect the other end to the
signal connector at the back of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection when
using a FDD cable with a covered Pin 5.
DSAN-DX/TS500-E5
Floppy disk drive connector
2. Serial ATA connectors [black] (7-pin SATA1-6)
These connectors, controlled by southbridge ICH9R, are for the Serial ATA
signal cables for Serial ATA hard disk drives.
DSAN-DX/TS500-E5
SATA connectors
ASUS TS500-E5
FLOPPY
NOTE:Orient the red markings
on the floppy ribbon cable to PIN 1.
PIN1
SATA1 GND
RSATA_TXP1 RSATA_1TXP2
RSATA_TXN1 RSATA_TXN2
GND
RSATA_RXN1 RSATA_RXN2
RSATA_RXP1 RSATA_RXP2
GND
GND
SATA3
RSATA_TXP3 RSATA_TXP4
RSATA_TXN3 RSATA_TXN4
GND
RSATA_RXN3 RSATA_RXN4
RSATA_RXP3 RSATA_RXP4
GND
SATA5 GND
RSATA_TXP5 RSATA_TXP6
RSATA_TXN5 RSATA_TXN6
GND
RSATA_RXN5 RSATA_RXN6
RSATA_RXP5 RSATA_RXP6
GND
GND SATA2
GND
GND
GND
SATA4
GND
GND
GND SATA6
GND
GND
4-9