Table of Contents
Advertisement
6.3.6
Resetting disks to Non-RAID
Take caution before you reset a RAID volume hard disk drive to non-RAID.
Resetting a RAID volume hard disk drive deletes all internal RAID structure on
the drive.
To reset a RAID set hard disk drive:
From the utility main menu, select 3. Reset Disks to Non-RAID, then press
1.
<Enter> to display this screen.
Resetting RAID data will remove internal RAID structures
from the selected RAID disks. By removing these structures,
the drive will revert back to a non-RAID disk.
WARNING: Resetting a disk causes all data on the disk to be lost.
Port
0
1
[ ↑↓ ]-Previous/Next
2.
Use the up/down arrow key to highlight the RAID set drive you want to reset,
then press <Spacebar> to select.
3.
Press <Enter> to reset the RAID set drive. A confirmation message appears.
4.
Press <Y> to reset the drive or press <N> to return to the utility main menu.
5.
Follow steps 2 to 4 to select and reset other RAID set drives.
6.3.7
Exiting the Intel
To exit the utility:
From the utility main menu, select 4. Exit, then press <Enter>.
1.
This window appears.
2.
Press <Y> to exit or press <N> to return to the utility main menu.
6-38
[
RESET RAID DATA
Drive Model
Serial #
XXXXXXXXXXXX
XXXXXXXX
XXXXXXXXXXXX
XXXXXXXX
Select the disks that should be reset.
[SPACE]-Selects
Matrix Storage Manager
®
[
CONFIRM EXIT
Are you sure you want to exit? (Y/N):
]
Size
Status
XX.XGB
Member Disk
XX.XGB
Member Disk
[ENTER]-Selection Complete
]
Chapter 6: RAID configuration
Advertisement
Table of Contents
