Table of Contents
Advertisement
4.4
Internal connectors
1.
Serial ATA connectors (7-pin SSATA1-2)
These connectors, controlled by Intel
cables for Serial ATA hard disk drives (SATA 1 connector is used for the optical drive
by default).
If the SATA M.2 (NGFF1) slot is occupied, the SSATA2 slot will be disabled.
2.
Mini-SAS HD connector (ISATA1-2)
This motherboard comes with mini Serial Attached SCSI (SAS) HD connectors, the
storage technology that supports Serial ATA. Each connector supports up to four
devices.
ASUS RS700-E9 Series
®
C621 chipset, are for the Serial ATA signal
4-13
Advertisement
Table of Contents
