Table of Contents
Advertisement
6.2.9
Enabling the WriteCache
You may enable the RAID controller's WriteCache option to improve the data
transmission performance.
When you enable WriteCache, you may lose data when a power interruption
occurs while transmitting or exchanging data among the drives.
To enable WriteCache:
From the Management Menu, select Objects > Adapter, then press <Enter>
1.
to display the adapter properties.
Select WriteCache, then press <Enter> to turn the option On (enabled).
2.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
3.
When finished, press any key to continue.
6-30
Rebuild Rate
Objects
Chk Const Rate = 30
Adapter
FGI Rate
Virtual Drive
BGI Rate
Physical Drive
Disk WC
Read Ahead
Bios State
Stop On Error = No
Fast Init
Auto Rebuild
Auto Resume
Disk Coercion = 1GB
Factory Default
Disk Write Cache - Off(Write Through) or On(Write Back)
Adapter 0
= 30
= 30
= 30
= Off
= On
= Enable
= Enable
= On
= Enable
Chapter 6: RAID configuration
Advertisement
Table of Contents
