s n o m 3 x 0 V o I P P h o n e s
Factory Reset
Note: You should reset the phone only in the following situations:
•
The phone configuration was changed and the phone is not functioning
anymore.
•
The help desk of your vendor or snom partner advised you to do so.
Action: Reset the phone configuration to factory values
snom 300
Enter the settings menu (see page 25) and navigate through the menu (see page 22)
Configuration
Press
Admin Mode Pwd
Warning: If you confirm by entering the admin password all current setting changes
will be lost and your phone must be configured anew manually unless mass
provisioning is used!
Enter the administrator password and press
Result: The phone reboots and the phone configuration is resetted.
Rebooting...
Phone Configuration
5 2 •
U s e r M a n u a l
snom 320
until the following screen is displayed:
Reset
Reset
Press
S2
Admin Mode Pwd
Rebooting...
snom 360
10 Maintenance
Press
— Admin Mode Pwd —
Admin Mode Pwd
Rebooting...
Rebooting...
© snom technology AG 2007
E n g l i s h
snom 370
5 Reset Values
time