Snom 300 User Manual page 55

s n o m 3 x 0 V o I P P h o n e s
Compare the major release level of the latest available firmware version published on
snom's firmware download website
If they differ you are strongly advised not to conduct a manual update!
Example: Latest available firmware version for snom 360 is 6.5.10
•
Snom 360 (1): Installed: snom 360-SIP 4.5
•
Snom 360 (2): Installed: snom 360-SIP 6.2.2
Firmware Update
Action: Conduct a manual firmware update
snom 300
Navigate to
link
Copy the (URL) of the appropriate firmware version X.Y.Z by right-clicking on the
Version
X.Y.Z
Setup Software Update
and paste the
The phone reboots automatically and you are prompted to confirm the update.
Press
The phone loads the new software from snom's web server. This process may take
some time depending on the <File Size> and the speed of your internet connection.
Warning: Any power interruption during the following process will most likely lead
to a flash memory error. As a result the system cannot boot up anymore and the
phone must be sent in for repairing at your own expense.
After successful download the old firmware is erased and the new firmware is written
The phone reboots again and will be initialized using the previously stored phone
Result: The firmware is updated. You can verify the successful update as described in
chapter "Version Check" on page 48.
© snom technology AG 2007
U s e r M a n u a l
23 with the firmware version installed on your phone.
snom 320
snom's firmware download website
"File" Symbol
Type
applications
Access the phone's web user interface
Manual Software Update Setup
link
into the "Firmware" field.
Start the update by clicking on Load
to confirm or press
into the phone's flash memory.
configuration.
automatic
use update
manual
update can be used
snom 360
File
.bin
to abort the update process.
Phone Configuration
E n g l i s h
snom 370
Size
<File Size> MB
Firmware
• 4 9