Snom 300 Quick User Manual

snom 300

Quick User Guide

Basic Phone Features

MAKING A CALL

Using the handset:
- Pick up the handset, the yellow line
indicator will light, dial the desired number.
Press the Confirm key to complete
the call.
Using the Speaker Phone:
- With the handset on-hook, press
or the line key (solid yellow LED when
pressed). Dial the desired number.
- Press the Confirm key to complete
the call.
- Alternatively you may dial the number
snom 300 Quick User Guide. DSM Telecom
first then press to complete the
call.
Using the (optional) Headset:
- To switch the phone to headset mode
press 4 times to enter Setup / Use
headset Device -> <On>. The symbol
will appear in the phone display. Repeat
the process to turn off or press the
Speaker button to toggle between headset
and speaker mode.
- Dial the desired number and press the
Confirm key to complete the call or
press the line key (solid yellow LED when
pressed).

ANSWERING A CALL

An incoming call is indicated by an audible
ringer and a blinking (yellow) line indicator.
Using the Handset:
- Pick up the handset.
Speakerphone Mode:
- Press , or with the handset on
hook press the line key with the active
indicator (yellow blinking), or the
Confirm key.
Using the (optional) Headset:
With the phone in headset mode you may
either press the blinking line indicator or
the Confirm key to answer your call.
In all cases the active call will appear on
the display showing call duration and caller
ID.
To switch the phone to headset mode
press 4 times to enter Setup / Use
headset Device -> <On>. The symbol
will appear in the phone display. Repeat
the process to turn off or press the
Speaker button to toggle between headset
and speaker mode.

ENDING A CALL

- Replace the handset, or if in speaker
phone mode press the Cancel key,
or press . If you are using the
phone in headset mode press the
Cancel key to end your call.

REDIAL

To redial last number press twice.
To redial previously dialed numbers
press . A list of recently dialed
numbers will be displayed with the most
recent at the top of the list. Use the
navigation keys to move through the list.
Press the Confirm key over a
displayed or highlighted entry to complete
the call.

MICROPHONE MUTE

During a call press so that the
other party cannot hear you. Press
again to resume audio.

HOLDING A CALL

- During a call press the Line key L1. The
call will be placed on hold, the yellow line
key indicator will flash slowly, and Hold will
be indicated on the phone display. The
caller on hold will hear Music or Message
on hold if enabled on your system.
- To resume the call press the flashing line
key L1 or press the Confirm key.
- Your phone will handle multiple calls on
hold. Press the line key to display all calls
on hold. Use the navigation keys to
move through the list. Press the
Confirm key or line key over a displayed
or highlighted entry to retrieve the call from
hold.

3 PARTY CONFERENCE CALL

You can create a conference with two
other parties using the phones local
conferencing feature.
- Place a call to the first party.
- Place the active call on hold by pressing
the line key. The caller will hear Music or
Message on hold if enabled on your
system.
Dial the phone number of the second
party.
When the second party answers, press
to join all parties in the Conference.
Ending the call on the conference
originator's phone will end the conference.
Use the DSM Telecom Conference
Service for larger conferences.

TRANSFERING A CALL

Blind Transfer (Transfer the call without
announcement):
- During a call, press . The caller
on hold will hear Music or Message on
hold if enabled on your system.
- Dial the number you want to transfer the
call to then press the Confirm key to
complete the transfer.
Transfer (Announced):
- Place your caller on hold by pressing the
Line key L1. Your caller will hear Music or
Message on hold if enabled on your
system.
- Dial the number you want to transfer the
call to then press the Confirm key.
- When the called party answers,
announce the call, press twice to
complete the transfer.
- Press to cancel the transfer i.e. the
called party does not wish to accept the
call.
1