Electrical Connection - Miele ESW 5088-14 Operating And Installation Instructions

Electrical connection

40
All electrical work should be carried out by a suitably
qualified and competent person in strict accordance with
current local and national safety regulations (BS 7671 in
the UK).
If the connection cable is damaged, it must be replaced
by a suitably qualified electrician with a specialist
connection cable of type H 05 V V-F (pvc insulated),
available from the Miele Service Department.
Installation, repairs and other work by unqualified persons
could be dangerous. The manufacturer cannot be held
liable for unauthorised work.
Ensure power is not supplied to the appliance until after
installation or repair work has been carried out.
The appliance must only be operated when built-in. This is
to ensure that all electrical parts are shielded. Live parts
must not be exposed.
Do not connect the appliance to the mains electricity
supply by an extension lead. These do not guarantee the
required safety of the appliance.
Please make sure that the connection data quoted on the
data plate match the household mains supply.