dbx DriveRack 260 User Manual page 70

Section 7
7.3 Stereo with Four Aux Zones
Hardware
1. Connect the outputs from the mixer to the inputs of the DriveRack™.
2. Connect the outputs of the DriveRack™ and run to the selected speaker amplifier.
3. Making sure that all outputs are muted, apply power to the mixer and amplifiers.
4. Make connections between the Zone Controllers (see Section 6.2) and the 260.
Software
1. Select a program (Factory: 2x2 w/ 4 Zones) as a template.
2. Load the program by pressing the PROG/CONFIG button.
3. Save multiple copies of this program to be recalled by the ZC-3 Controller.
4. Adjust the individual parameters for each of the programs by pressing the Processing
5. Using the Utility Menu, select the ID for each ZC-1 and ZC-2 Zone Controller and program
6. Using the Utility Menu, select the ID for the ZC-3 Zone Controller and select the programs
2
MA-5002VZ
JBL AE Series
AC2215/64
62
DriveRack™ User Manual
Application Guide
Module buttons.
its output level boost and cut parameters.
that the ZC-3 will load from each of its positions.
Left
3
dbx ZC-1
JBL Control 26C
Ceiling Speaker
Zone A
Right
4 5
dbx ZC-2 dbx ZC-1
JBL Control 26C JBL Control 26C
Ceiling Speaker Ceiling Speaker
Zone B Zone C
DriveRack
dbx ZC-3
dbx ZC-2
JBL Control 26C
Ceiling Speaker
Zone D
®
™