™
DriveRack
Section 7
Application Guide
7.2- Stereo Tri-amp
Hardware
1.
Connect the outputs from the mixer to the inputs of the DriveRack™.
2. Connect the outputs of the DriveRack™ and run to the selected speaker amplifier.
3. Making sure that all outputs are muted, apply power to the mixer and amplifiers.
Software
1. Select a program (Factory: 2x6 Stereo) as a template.
2. Load the program by pressing the PROG/CONFIG button.
3. Adjust the individual parameters for the system by pressing the Processing Module buttons
Left
Right
2
3
4
5
MA-5002VZ
JBL SR4731X
JBL 4719X
®
61
DriveRack™ User Manual