DriveRack
From program mode, press the Delay button. Pressing the Data Wheel will select the effect parameter to be edited.
Successive Presses of the Delay button will move you through pre and post crossover delays.
From program mode, press the UTILITY button. Pressing the Data Wheel will select the effect parameter to be edited.
<PREV PG
NEXT PG>
Noise gate-
Limiter
1-3
AGC-
Successive presses of the Data wheel will select
effect parameters within the currently selected page.
®
™
DELAY
Delay - On/Off
Length - Delay Time - Course, Fine
Units - Seconds,Feet,Meters
Successive presses of the Data wheel will select
effect parameters within the currently selected page.
2.8 Navigating the Utility/Meters Section
Pressing and holding the Utility button will enter you into the meter mennu
UTILITY
LCD Contrast 1-16
AEQ Plot - RTA/GEQ
260 Device Level-
Low, Med, High
Output Jumpers -
1-6
Setting - 14, 22, 30dB
Limiter 4-6
Zone Controller-
1-3
Editing Functions
2.7 Navigating the Delay Section
PUP Prog. - Current/Stored
ZC Panel -
1-6
PUP Mute - Current/Stored
(Store) -
Edit Panel
Edit High Password
Program List Size- 1-10
Edit Medium Password
List Index -
1-10
Zone Controller-
Output Trims
Output Trims
4-6
1-3
4-6
DriveRack™ User Manual
Section 2
DELAY
UTILITY
Security Level - Module Select
Security Level- Low, Med, High
Program Change mode
Normal/Program
Program Number Lock 1-25
METERS
17