From program mode, press the Other button. Successive presses of the Other button will move you to each of the various insert modules available.
<PREV PG
NEXT PG>
The NEXT and PREV
buttons scroll through
the pages of selected module.
2.6 Navigating the Dynamics Section
From program mode, press the comp/limiter button to move to eithter the Dynamics module. Once you have reached the Dynamics module,
successive presses of Dynamics button will move through each channel that utilizes either a Compressor (pre Crossover) or Limiter (post-crossover) module.
Navigate through the Pages of the selected compressor or Limiter module by pressing the "Next Page" or "Prev Page" buttons successively until you arrive at the desired Page.
DYNAMICS
The Comp/Limiter button
toggles through the AGC
Compressor or
Limiter modules used in
each channel of
the selected
program.
16
DriveRack™ User Manual
Editing Functions
Pressing the Data Wheel will select the effect parameter to be edited.
OTHER
Subharmonic Synthesizer
Subharmonic - -On/Off
Subharmonics % 0-100
OTHER
Advanced Feedback Suppression (AFS)
AFS On/Off
AFS Clear
OTHER
Notch Filter
Notch-
On - Off
Flatten/Restore
Successive presses of the Data wheel will select
effect parameters within the currently selected page.
Comp On/Off
COMP
Auto On/Off
Over Easy Off, 1-10
Gate On/Off
GATE
Ratio 1:1 to ∞Inf:1
Threshold -50-22dB
AGC On/Off
AGC(Pre)
Target -20-20dBu
Gain 1 to 20dB
Limiter On/Off
LIMITER
Over Easy Off, 1-10
Threshold -40-20dB
AGC On/Off
AGC(Post)
Target -20-20dBu
Gain 1 to 20dB
Successive presses of the Data wheel will select
effect parameters within the currently selected page.