Navigating The Wizard Section; Navigating The I/O Section - dbx DriveRack 260 User Manual

Section 2

2.9 Navigating the Wizard Section

From program mode, press the RTA/WIZARD button. Pressing the Data Wheel will select the effect parameter to be edited.
<PREV PG NEXT PG>
The NEXT and PREV
buttons scroll through
the pages of selected module.
RTA/WIZARD
Successive presses of the Data wheel will select
effect parameters within the currently selected page.

2.10 Navigating the I/O Section

From program mode, press the I/O button. Pressing the Data Wheel will select the effect parameter to be edited.
<PREV PG NEXT PG>
The NEXT and PREV
buttons scroll through
the pages of selected module.
18 DriveRack™ User Manual
Editing Functions
SYSTEM SETUP
GEQ Setup-Dual Mono
Insert 1 Setup-
or Stereo Linked
Select
Amp Select-
Amp Sensitivity- Amp Level
High, Mid, Low
High, Mid, Low High, Mid, Low
See list
AUTO EQ WIZARD
Connect Mic Pink Noise Level
-Inf to 20dB
AFS WIZARD
Mixer gain turn Select Number of
down prompt Fixed Filters
- 0-12
FEEDBACK
Input Level 1 -Inf to 20dB
Input Level 2 -Inf to 20dB
Master Level -Inf to 20dB
Successive presses of the Data wheel will select
effect parameters within the currently selected page.
DriveRack
Sub Speaker Select-
Insert 2 Setup- Main Speaker Select-
Select See list
Low Amp Load New
Bridged/ Program-
Normal-
Auto EQ - L Auto EQ - R
Select Type - Mixer Gain Adjust- Fixed Filter Setup
Low, Med, High mode Done-
Pink Noise On/Off
Pink Noise Level -10 to 10dB
WIZARD
See list
Auto EQ - L-R
Left and Right when using
Linked Graphic EQ
I/O Section
Output Channel 1-6 On/Off
Polarity +/-
Phase -180 to 0
®
™