Frequently Asked Questions - Miele SALAMANDER GRILL CS 1421 Operating And Installation Instructions

Salamander grill
Hide thumbs Also See for SALAMANDER GRILL CS 1421:
Table of Contents

Advertisement

Repairs should only be carried out by an authorized technician in accordance
with local and national safety regulations. Unauthorized repairs could cause
injury or appliance damage. The manufacturer cannot be held responsible for
unauthorized work.
The unit will not raise?
Possible fault
Dirt has built up in the gap around the
browning unit or something has
become stuck.
The fuse or breaker was tripped.
The unit will not heat up?
Possible fault
The browning unit is not raised
sufficiently, by at least 2
The ledge is not inserted or positioned
correctly.
There has been a power outage during
operation, and the heating has been
shut off.
The unit will not retract?
Possible fault
The appliance is not sufficiently cooled
down. The residual heat indicator must
be off.
The ledge is not positioned correctly.
When retracted, the browning unit continues to move slightly upwards
Possible fault
An object has come between the
browning unit and the ledge

Frequently asked questions

Solution
Remove the dirt or the object which has
become stuck.
Contact a qualified electrician or Miele
Technical Service for assistance.
Solution
Raise the browning unit by at least
3
/
" (70 mm).
2
4
Insert the ledge or postion it correctly.
To place the appliance back in
operation, turn the control knob to "0"
and fully lower the browning unit.
Solution
The residual heat indicator must be off
before the unit can be retracted.
Postion the ledge correctly
Solution
Remove the object (see "Safety
features / Obstruction protection").
3
/
" (70 mm).
4
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cs 1421

Table of Contents