Conventional Mode Operation - Motorola EMS APX 7500 User Manual



Conventional Mode Operation

This feature allows you to monitor channel traffic on
conventional channels by defeating the coded squelch. Thus
you can to listen to another user active on the channel. This
way, you may be prevented from talking over someone else's
conversation.
Note: This feature must first be enabled by a qualified radio
technician or system administrator.
Procedure:
Take the control head off hook. (This is the same as monitor on.
You hear all channel traffic.)
OR
1
At Home mode where the default zone and channel are
>
being displayed, or
2
Press the Menu Select button directly below MON
momentarily to activate monitoring. The display shows
MONITOR ON.
3
Press the Menu Select button to deactivate the monitoring.
The display shows MONITOR OFF.
MONITOR ON
shown on the display indicates that the radio is
monitoring. Pressing the Menu Select button again turns
monitor off and you don't hear all channel traffic.
If you try to transmit on a receive-only channel, you hear an
invalid tone until you release the PTT button.
English
<
button to MON.

Selecting a Talkgroup
Procedure:
> <
1
or to TGRP.
2
Press the Menu Select button directly below TGRP. The
display shows the last talkgroup that was selected and
stored.
> <
3
or to PSET for the preset preprogrammed talkgroup.
OR
> <
or to the required talkgroup.
OR
Use the keypad to enter the number of the corresponding
talkgroup in the list.
4
Press the Menu Select button directly below SEL to save
the currently selected talkgroup and return to the Home
screen.
5
If the encryption key associated to the new talkgroup is
erased, a momentary key fail tone sounds and the display
shows KEY FAIL.
OR
If the encryption key that is associated to the new talkgroup
is not allowed, a momentary key fail tone sounds and the
display shows ILLEGAL KEY.
6 H
Press or the PTT button to exit.
11/2/15 21