General Radio Operation
5
Press and hold the PTT
button to transmit. The LED
lights RED while
transmitting.
6
Release the PTT button to
receive (listen).
Use the Preprogrammed Monitor Button
1
Turn the radio on and select
the desired zone and
channel.
2
Press the Monitor button
and listen for activity. (See
the following Conventional
Mode Operation.)
3
Adjust the Volume Control
knob if necessary.
4
Press and hold the PTT
button to transmit. The LED
lights RED while
transmitting.
5
Release the PTT button to
receive (listen).
Conventional Mode Operation
Your radio may be programmed to receive Private-Line® (PL) calls.
1
Momentarily press the
Monitor button to listen for
activity. The Carrier Squelch
indicator is displayed.
26
C
Adjust
Level
C