Handicare Puma 40 User Manual page 29

Lift the battery tray back into the battery box by
grasping the battery guard then lift the battery
tray upward. Then pull the battery tray outward
to allow it to dock onto two projection posts on
both sides of the battery box. (Figure 25)
Warning!
Dock the battery tray slowly on the projection in
the battery box!
Re-insert the battery guard into the battery box.
(Figure 26, #1 and #2)
Rotate the battery guard handle to an upward
position. (Figure 27, #1)
Loop the battery strap under the battery guard,
pull tight and reconnect the velro sections.
(Figure 27, #2)
Re-install the battery access cover.
(Figure 27, #3)
Re-connect all fuses and connections to the
power module. Then re-install the power
module cover.
Maintenance of the wheelchair | 29
Figure 25
Figure 26
Figure 27