Displaying The Screen; Installing The Touch Panel Driver - Eizo FlexScan T1501-B Setup Manual

Prior to use

Displaying the Screen

1
Press to turn on the monitor.
The monitor's power indicator lights up blue.
2
Turn on the PC.
The screen image appears.
When turning on the monitor and PC for the first time with the analog signal, the Auto Adjustment
function works to adjust the clock, phase, and display position automatically.

Installing the Touch Panel Driver

Attention
• The user account to be used for installing the touch panel driver must have the "Administrators" privilege.
• When reinstalling the touch panel driver to update the driver, etc., restart the PC after uninstalling the
driver and then install it.
1
Uninstall the other touch panel driver, if it is installed.
2
Install the touch panel driver according to the instructions included in the EIZO
LCD Utility Disk (CD-ROM).
For how to install the touch panel driver, see the Touch Panel Driver User's Manual (on the CD-ROM).
3
Use either cable of RS-232C (FD-C38-K) or USB (MD-C93) to connect the monitor
and the PC.
Connectors on the
PC
COM port
Connectors on the
PC
USB port
4
Restart the PC.
4
Installation
[T1501-B]
RS-232C Cable FD-C38-K (supplied)
[ T1502-B]
USB Cable MD-C93 (supplied)
Setting/Adjustment Troubleshooting
Connectors on the
monitor
RS-232C port
Connectors on the
monitor
USB port