Page 2 of 8 Table of Contents Phone System Programming .......................... 3 Changing the Name of a Set ............................. 4 Changing the Time and Date ............................4 Programming System Speed Dials ..........................4 Common Feature Codes: ..............................4 Voicemail Programming ..........................
Page 3 of 8 Phone System Programming Programming Overlay Note : When entering System Programming (**266344), refer to the Programming Overlay T-Series M-Series Service: 604 -856- 9155 Email: service@natg.ca...
Page 4 of 8 Changing the Name of a Set Feature * * 266344 1. Press 738662 2. Enter Log Code: , press 266344 3. Enter Password: Terminals and Sets Show (top right arrow(by where your lines are)) 4. See : press Extension Number 5.
Page 5 of 8 Voicemail Programming Log Code If you are 2 Digit Extension your log code will be one of the following: 121234 121111 120000 If you are 3 Digit Extension your log code will be one of the following: 1021234 1021111 1020000 If you are 4 Digit Extension your log code will be one of the following: 10021234...
Page 6 of 8 CCR Tree Setup and Changes Making changes to a CCR Tree involves steps: Disabling the Tree Making Changes to the Tree Important N : You MUST save tree before exiting the system Saving the Changes Re-Enabling the Tree Disable the Tree: Feature 983...
Page 8 of 8 Delete a Mailbox: Feature 983 1. Press 738662 2. Enter Log Code: , press 266344 3. Enter Password: MBOX, 4. Press then Mailbox Number 5. Enter 6. Press 7. To re-add the a new mailbox, Press (will skip you to step of next instructions) or Press to exit...